Breakers tripping, buzzing panel or a breaker that won't reset? Call to speak with a local electrician about panel and breaker service.
Serving Boise, ID
Service overview
Your electrical panel distributes power to every circuit in the home. Panel and breaker service includes inspecting the panel, replacing faulty breakers, tightening connections and evaluating whether an older or undersized panel should be upgraded. Many older homes were built for far less electrical demand than today's kitchens, HVAC systems and EV chargers.
Warning signs
Symptoms homeowners notice, with the most likely causes.
Smell burning or see sparks? Call right away.
A breaker shuts off repeatedly, even under normal load.
Possible causes: an overloaded circuit, a short or a worn breaker.
The breaker snaps back off or won't stay in the on position.
Possible causes: a fault still on the circuit or a failed breaker.
A breaker or the panel cover is warm to the touch.
Possible causes: a loose connection at the breaker or a circuit carrying too much load.
Noise coming from the panel can point to a loose or failing connection.
Possible causes: loose terminals, arcing or a failing breaker.
Any burning smell near the panel should be checked promptly.
Possible causes: overheated wiring or arcing inside the panel. Treat it as urgent.
Rust or corrosion on breakers, bus bars or the enclosure.
Possible causes: moisture in or around the panel.
Power cuts out on one or more circuits more often than it should.
Possible causes: overloaded circuits or worn breakers.
Scorch marks, melted plastic or a damaged cover.
Possible causes: overheating, arcing or physical damage.
Diagnose first,
then repair
What the work involves
An electrician checks the panel's condition and load before recommending a breaker replacement, a repair or a full upgrade.
Swapping out worn or faulty breakers.
Fixing loose connections, damaged bus bars and components.
Replacing an outdated or damaged panel.
Increasing capacity for new appliances or additions.
Adding circuits for a garage, shop or addition.
Checking condition, labeling and safety.
Options
Pricing
Every repair is different, so there is no fixed price on this page. These are the things that shape the cost.
Call to Discuss Your Repair(555) 555-55553 simple steps
Call the number on this page and tell us what is going on with your electrical system.
Describe the problem, your location and how soon you need help.
Your call is connected with a local electrical service provider who can help.
You may also need
Diagnosis and repair of outlets, switches, circuits and other everyday electrical faults.
Help with urgent electrical problems like burning smells, sparking or sudden power loss.
Wiring repair, new circuits and partial or whole-home rewiring.
Level 2 home EV charger installation, including circuit and panel evaluation.
Electrical Panel Repair in Boise neighborhoods and nearby cities
Good to know
Whether you call it a breaker box, a fuse box or an electrical panel, it's the heart of your home's electrical system. Repairs range from replacing a single breaker to swapping out the whole panel when it's damaged or outdated.
Kitchen remodels, heat pumps, hot tubs and EV chargers can push an older 100-amp panel to its limit. A panel upgrade, often to 200 amps, adds room for new circuits. An electrician starts with a load calculation to see what your home actually needs.
Homes with fuse boxes or panel brands that are no longer made are good candidates for an evaluation, especially if breakers trip often or parts are hard to find.
FAQ
A breaker trips to protect the wiring when something is wrong. The most common causes are too many devices on one circuit, a short circuit where wires touch, or a ground fault, often in kitchens, bathrooms, garages or outdoors. Breakers also wear out over time. If a breaker trips again right after you reset it, or trips often for no clear reason, leave it off and have the circuit checked.
A faint hum can be normal, but loud buzzing, crackling or heat can mean a loose connection or failing breaker. Have it checked promptly.
A single bad breaker or a loose connection can usually be repaired. Replacement makes more sense when the panel shows heat damage or corrosion, parts are no longer made, breakers trip often under normal use, or there isn't enough capacity for what you want to add, such as an EV charger, heat pump or hot tub. An electrician can inspect the panel and explain both options.
The type of issue, the number of breakers, the panel's brand and condition, whether a full replacement is needed and how easy the panel is to reach.
It's often done in a day, but it depends on the home, the panel and local permit and inspection requirements.
Common signs are frequent tripping, plans for an EV charger, heat pump or hot tub, or a panel that's full. A load calculation gives a clear answer.
Have another question? Call and ask
Talk to an electrician
Tell us what is going on and get connected with a local electrician.
